Kaffelogic community

End of the day it all PID controlled. May be you set lower tan 100 for last one there to keep higher speed for longer? It will cooling down near ambient ( not quite exactly and depends on the temp recoded when you power on your roaster ). KL shroud have more insight on this logic behind but that lo ...

That setting is under profile setting at near bottom. May need to change your difficulty level on studio under options.

Now ne care ful on that too high make more beans to jump in to chaff collector.

idea of the reference load in profile ( set in studio ) was to boost to work more effectively with out translate the load-size by user for profile developed as not the 100~120g load. So the refence load size saying to roster that this profile is designed to load 80g on the standard base calibration ...

So essentially, the boost uses the ‘recommended load size’ as its reference point. It doesn’t have 120g hardcoded; it’s just that the default value for the recommended load size happens to be 120g. Am I understanding this correctly? Sorry, it’s straightforward yet confusing at the same time. That's...

say the profile you use is developed to target of 100g and you are Loding that amount, I will not touch the default. but my experience, I did not notice match deterrence setting boost parameter to 100g or levee it 120g. You could adjust said profile adjust to KF default roading size and let roaster ...

I read much about "Raost Profiles" including references to Raostv4,5 etc, but I don't find specific downloads. Am I in the wrong Kaffelogic Community? Where do I find more on this topic? back one page and you shroud fine the post that imbedded the profile for download, https://community.k...

BenDavis wrote: ↑Mon 31 Jul, 2023 6:41 am Hi there, Do either of you know if you can update a KL Nano 7 USB A to a laptop? Bought the Nano 7 in 2020!

I do not think this can be done for current stage. ( USB A version of KL with memory stick )
I haven't got any update for that feature.

No. The boost ring will be inside the glass tube.

With new firmware and software, you cans set reference load size on profile. May be set it to 80 for this profile? If not set it is default value is 120. My goto profile is nominally developed for 100g load with default setting and update profile profile seems to be more reliable resukt with boost.