Kaffelogic community

I have been doing a heap of experiments with different probe positions, bare and sheathed with the stock KL thermocouple. Even in manual mode with a fixed fan and 1100W once the temperature reading hits 242.3C limit set in the studio, the power cuts off and drops around 20C then comes back on again ...

Great, thank you Wayne.

Just wondering is the bare thermocouple K type? Or....


Thanks

Sounds great.
Current thinking even just one more would do the job in most cases and anymore than 5 would be overkill.

̶H̶e̶y̶ ̶G̶e̶r̶o̶n̶i̶m̶o̶,̶ ̶ ̶ ̶W̶i̶t̶h̶ ̶l̶o̶t̶s̶ ̶o̶f̶ ̶i̶d̶e̶a̶s̶ ̶/̶ ̶h̶e̶l̶p̶ ̶f̶r̶o̶m̶ ̶L̶u̶c̶a̶ ̶I̶ ̶h̶a̶v̶e̶ ̶m̶a̶d̶e̶ ̶s̶o̶m̶e̶ ̶p̶r̶e̶t̶t̶y̶ ̶s̶i̶g̶n̶i̶f̶i̶c̶a̶n̶t̶ ̶l̶e̶a̶p̶s̶ ̶a̶n̶d̶ ̶b̶o̶u̶n̶d̶s̶ ̶i̶n̶ ̶h̶o̶w̶ ̶t̶o̶ ̶ ̶b̶e̶s̶t̶ ̶u̶s̶e̶ ̶t̶h̶e̶ ̶r̶o̶a̶s̶t̶e̶r̶ ̶o̶v̶e̶r̶ ̶t̶h̶e̶ ̶l̶a̶s̶t...

Cheers Mark, still learning heaps over last couple of days about what all this means.

Here some measured observations of the 2 profiles in question. ---- Rest1200 takes far too long to reach appropriate ET, under developing the roast from the very start, this likely causes the outer layers of seed to over dry and the insides never get done. Eventually the temp picks up, it stalls ou...

Here some measured observations of the 2 profiles in question. Coffee is a Brazil Pulped natural Andressa 2018 / 2019 800 - 1200m Grade: NY2/3 SSGC Caturra / Bourbon Milk chocolate, caramel, big body Chris did a good job with the Classic profile, it is pretty close to getting the basic roasting Envi...

Back to the washed Ethiopian Guji. Several manual roasts dialling it in, after which I decided to use the information I had to make some guesses and create a profile for it. I wanted a roast around the same time 9:00 as the dark roast so need a more gentle start then carefully ramp up the heat, whic...

Hello Chris, Just wondering what is the maximum number of zones that you could add to the KL studio? Ideally I would like 10 instead of 3 but I will be happy with what ever you can manage. EDIT: After more experimentation i am thinking 5 would be plenty. Or could a separate section be set up specifi...