Firmware version 7.6.6.1429
Firmware version 7.6.6.1429
After years of almost flawless use, I've just update my original unit to this firmware and am now getting "Fault detected" errors (wasting beans).
There is nothing in the log file(s), they just stop recording.
I've removed the USB (SanDisk Cruzer Blade) and a new roast is progressing. I've done checks on the USB and nothing is showing up as problematic. Looks like possibly some buggy comms with the USB roast logging.
There is nothing in the log file(s), they just stop recording.
I've removed the USB (SanDisk Cruzer Blade) and a new roast is progressing. I've done checks on the USB and nothing is showing up as problematic. Looks like possibly some buggy comms with the USB roast logging.
Re: Firmware version 7.6.6.1429
I just got fault detected watchdog alarm, never had this happen before
Re: Firmware version 7.6.6.1429
I've done more than 15 roast with this firmware but did not have any issue.
Ben
Re: Firmware version 7.6.6.1429
Hi All
I hope you are all well.
We are looking into the firmware issue above. Could anyone let me know if the issue has resolved or is it still ongoing? Is that the only error you get from the roaster?
Regards
Wayne
I hope you are all well.
We are looking into the firmware issue above. Could anyone let me know if the issue has resolved or is it still ongoing? Is that the only error you get from the roaster?
Regards
Wayne
Re: Firmware version 7.6.6.1429
Hi Wayne ,
Since upgrading:
Since upgrading:
- First roast resulted in the fault early in the roast cycle.
- Second roast results in the fault during cool down cycle.
- Third roast succeeded.
- Fourth roast succeeded.
- Fifth roast results in the fault during cool down cycle.
- Sixth roast resulted in the fault early in the roast cycle.
Re: Firmware version 7.6.6.1429
I've ended up having to downgrade to 7.5.0.1124 just so I could roast something, was getting resonably persistent failures and beans are getting a bit too expensive.
I wonder if there is a bug somewhere around the power check. I can sometimes get low power messages under < 7.6.6 versions
I wonder if there is a bug somewhere around the power check. I can sometimes get low power messages under < 7.6.6 versions
-
- Posts: 1
- Joined: Thu 22 Jul, 2021 2:11 am
Re: Firmware version 7.6.6.1429
Hi All
I also encountered some issue here after updating the firmware. same error during cooling. I have no choice but downgrade back to old firmware. And I think I cant change profile on new firmware. it stuck on loading the new one.
Please find last log and photo of the error attached.
Regards
Wei
I also encountered some issue here after updating the firmware. same error during cooling. I have no choice but downgrade back to old firmware. And I think I cant change profile on new firmware. it stuck on loading the new one.
Please find last log and photo of the error attached.
Regards
Wei
Re: Firmware version 7.6.6.1429
I'm currently trying with the new 7.7.8.1538 firmware, will see how it goes.
2 complete roasts done without issue, so

2 complete roasts done without issue, so
Re: Firmware version 7.6.6.1429
Hi Wmcoffeelove
Thanks for this.
Please try the latest firmware update release through Kaffelogic Studio:
7.7.8.1538. Please let me know if the issue persists with this?
Regards
Wayne
Thanks for this.
Please try the latest firmware update release through Kaffelogic Studio:
7.7.8.1538. Please let me know if the issue persists with this?
Regards
Wayne