That's a pretty nice looking graph now.
Even when the roaster says turn me off now, leave it on if you intend using it within the next half hour or so.
HELP Voltage / kW / ROR all over the place
- kaffelogic
- Site Admin
- Posts: 514
- Joined: Thu 18 Oct, 2018 9:38 am
- x 74
- Contact:
Re: HELP Voltage / kW / ROR all over the place
How do I continue use, once my roaster displays turn me off, nothing works other than the power switchEven when the roaster says turn me off now, leave it on if you intend using it within the next half hour or so.
- kaffelogic
- Site Admin
- Posts: 514
- Joined: Thu 18 Oct, 2018 9:38 am
- x 74
- Contact:
Re: HELP Voltage / kW / ROR all over the place
My statement was actually quite stupid. There is no way to keep it on past that point. Should have said: leave it on if you intend roasting again within the next 10 mins, otherwise turn it off straight away.
The firmware could be modified to allow it to be re-awakened without turning it off when it shows that message. Let me know if you think that would be useful.
The firmware could be modified to allow it to be re-awakened without turning it off when it shows that message. Let me know if you think that would be useful.
Re: HELP Voltage / kW / ROR all over the place
I would find it helpful.
I get caught quite often, it is easy enough to switch, but would be more convenient if I could continue without powering on/off
I get caught quite often, it is easy enough to switch, but would be more convenient if I could continue without powering on/off
- kaffelogic
- Site Admin
- Posts: 514
- Joined: Thu 18 Oct, 2018 9:38 am
- x 74
- Contact:
- kaffelogic
- Site Admin
- Posts: 514
- Joined: Thu 18 Oct, 2018 9:38 am
- x 74
- Contact: