HELP Voltage / kW / ROR all over the place

[kaffelogic]

That's a pretty nice looking graph now.

Even when the roaster says turn me off now, leave it on if you intend using it within the next half hour or so.

[Damian]

Even when the roaster says turn me off now, leave it on if you intend using it within the next half hour or so.

How do I continue use, once my roaster displays turn me off, nothing works other than the power switch

[kaffelogic]

My statement was actually quite stupid. There is no way to keep it on past that point. Should have said: leave it on if you intend roasting again within the next 10 mins, otherwise turn it off straight away.

The firmware could be modified to allow it to be re-awakened without turning it off when it shows that message. Let me know if you think that would be useful.

[Damian]

I would find it helpful.
I get caught quite often, it is easy enough to switch, but would be more convenient if I could continue without powering on/off

[kaffelogic]

Ok, I'll slip it into the next firmware update.

[kaffelogic]

Done, see https://kaffelogic.com/community/viewto ... t=130#p807