Page 1 of 1

Expected life of the Nano?

Posted: Tue 03 Nov, 2020 10:29 pm
by mr. bean
Hi Chris / Wayne,

Just wondering if you have any idea how many roasts you'd expect a typical Nano 7 to do before something failed? Obviously things can go wrong at any time, but wondering if there's any testing been done or educated guesses??

Because it's so easy to roast, I roast for a few friends (even with the 120g limit!), and just wondering how much Im shortening the lifespan : )

Cheers,
Matt

Re: Expected life of the Nano?

Posted: Tue 08 Dec, 2020 1:42 pm
by kaffelogic
The nominal figure is one roast per day for five years which is around 2,000 roasts. However it is intended as an heirloom machine with each part replaceable and therefore an indefinite lifespan. That nominal figure is running time without need to replace a part. Thermocouple and heater element are the two components most likely to need early replacement.

Re: Expected life of the Nano?

Posted: Sat 12 Dec, 2020 1:46 am
by Angela
I needed to dissemble and clean the contacts connecting the motor to the circuit board at around 430 roasts. The fan motor first became intermittent at starting and then finally would not run.

Reseating the contacts and reassembly gave temporary respite. However, it took a full clean with a contact cleaner and lubricant spray that finally fixed it, 2 or 3 months ago. Whether my machine - backer's model - is typical who knows.

Car manufacturers overcome this kind of problem with mechanically clamped connectors I understand.

Re: Expected life of the Nano?

Posted: Tue 15 Dec, 2020 11:54 am
by kaffelogic
Thanks for adding this info Angela. So far I am not aware of anyone else encountering this issue, but will certainly be keeping an eye out for it, and will add your experience and actions to our troubleshooting guide. If it does prove to be a widespread issue we will modify our manufacturing accordingly. Given that we already have a number of hand soldered joints on the board I would be inclined to make this a soldered connection.

Re: Expected life of the Nano?

Posted: Tue 02 Feb, 2021 11:28 am
by mr. bean
Thanks for the info - and for sharing your experience Angela.
So far I'm up to just over 530 roasts and no issues. Sometimes (not often!) I do 12 roasts in a day when roasting for a few friends with no issues.

So hopefully many roasts to come : )

Re: Expected life of the Nano?

Posted: Mon 22 May, 2023 12:41 pm
by Eightimmortals
Mine died today, no power but was working fine at last use. Is under three years old and only used once per week/fortnight. Am waiting a response from KL support.

Re: Expected life of the Nano?

Posted: Mon 07 Aug, 2023 5:54 am
by domi
FWIW, I received my Nano almost 4 years ago and it now has 819 roasts under its belt. Still going strong.

Re: Expected life of the Nano?

Posted: Mon 07 Aug, 2023 1:34 pm
by rosemarycole6
Eightimmortals wrote: Mon 22 May, 2023 12:41 pm Mine died today, no power but was working fine at last use. Is under three years old and only used once per week/fortnight. Am waiting a response from KL support.
@Eightimmortals,
how did you go with your getting your Nano repaired/replaced?