Page 1 of 1

link error

Posted: Mon 11 Mar, 2024 7:45 pm
by syeon
I was using the link, but suddenly
"supply 250v way be too low... " That's what happened I used a single outlet at home and elsewhere, but the same error occurred.
I'd like to know if this is a problem with the profile or a problem with the link.
I'm using it again after resetting it But I think the same problem will happen again

Re: link error

Posted: Tue 12 Mar, 2024 1:15 pm
by kaffelogic
If the reset has fixed it then it was the Link needed a reset. It is very unlikely to happen again.

If the reset has not fixed it then it is most likely a problem with the profile.