Watchdog error
Posted: Tue 19 Nov, 2019 9:06 am
There is a known issue with firmware version 7.3.6 and earlier. This will cause occasional watchdog errors.
The issue means that slight variations in ambient temperature and ordinary component variation (within specification) can cause this alarm to trigger intermittently for some users. This is not a cause for concern and is in fact a 'false alarm'.
The solution is to update your firmware to version 7.3.7 or higher. Please visit https://kaffelogic.com/index.php/home/support for instructions and firmware download.
If the problem persists after firmware update please contact [email protected]
See what firmware version you have: press ≡ four times, until you see "Press ▶ now for technical info". The ▶ button will then step you through various pieces of information about your roaster including your installed firmware version.
The issue means that slight variations in ambient temperature and ordinary component variation (within specification) can cause this alarm to trigger intermittently for some users. This is not a cause for concern and is in fact a 'false alarm'.
The solution is to update your firmware to version 7.3.7 or higher. Please visit https://kaffelogic.com/index.php/home/support for instructions and firmware download.
If the problem persists after firmware update please contact [email protected]
See what firmware version you have: press ≡ four times, until you see "Press ▶ now for technical info". The ▶ button will then step you through various pieces of information about your roaster including your installed firmware version.