new kaffelogic
new kaffelogic
Hi, I just received my Kaffelogic on Wednesday 19th April, and the USB is
faulty.
Just put it in and it said "Scanning the USB", the next thing it said "
Error Check this device".
When I pushed "Profiles" . . . nothing.
What's the story?
Thanks,
Raglan.
faulty.
Just put it in and it said "Scanning the USB", the next thing it said "
Error Check this device".
When I pushed "Profiles" . . . nothing.
What's the story?
Thanks,
Raglan.
- kaffelogic
- Site Admin
- Posts: 557
- Joined: Thu 18 Oct, 2018 9:38 am
- x 83
- Contact:
Re: new kaffelogic
If your memory stick is faulty please contact customer support at kaffelogic.com/help for a replacement.
Meantime you can make your own with any other memory stick that you have. Using Kaffelogic Studio you can put all of the core profiles onto the memory stick and away you go.
Meantime you can make your own with any other memory stick that you have. Using Kaffelogic Studio you can put all of the core profiles onto the memory stick and away you go.
Re: new kaffelogic
I have put all the memory profiles onto my memory stick, I pushed "profiles". It went "K-logic classic" Then I pressed Profiles again, it went )-1200m Rest. Then it goes K-logic classic again ???
How do I go through the list of Profiles ???
How do I go through the list of Profiles ???
- kaffelogic
- Site Admin
- Posts: 557
- Joined: Thu 18 Oct, 2018 9:38 am
- x 83
- Contact:
Re: new kaffelogic
You are doing the correct thing on the roaster. The problem will be the memory stick.
- Make sure the memory stick is good by putting it in your laptop and performing a check. Ideally use a freshly formatted memory stick.
- Use Kaffelogic Studio to copy the coffee profiles to the roaster
Re: new kaffelogic
Ive put all the profiles onto a Stick after formatting it (FAT32). But still no go. I need help. Will you give me detailed description? one or two lines is not enough.
- kaffelogic
- Site Admin
- Posts: 557
- Joined: Thu 18 Oct, 2018 9:38 am
- x 83
- Contact:
Re: new kaffelogic
- Download, install, and open Kaffelogic Studio. Download here.
- Select Tools> View memory stick > Core profiles > Copy/replace all core profiles
- Also recommended, reset your roaster: hold down the ▸ button while you switch on the power to the roaster.
Re: new kaffelogic
Thanks,
I've sorted all my Roaster Problems. Phew . . . it was a mission, but thanks to Steve, I have profiles to experiment with.
Rags.
I've sorted all my Roaster Problems. Phew . . . it was a mission, but thanks to Steve, I have profiles to experiment with.
Rags.