Page 1 of 1
new kaffelogic
Posted: Fri 21 Apr, 2023 12:32 pm
by Raglan
Hi, I just received my Kaffelogic on Wednesday 19th April, and the USB is
faulty.
Just put it in and it said "Scanning the USB", the next thing it said "
Error Check this device".
When I pushed "Profiles" . . . nothing.
What's the story?
Thanks,
Raglan.
Re: new kaffelogic
Posted: Fri 21 Apr, 2023 5:22 pm
by kaffelogic
If your memory stick is faulty please contact customer support at
kaffelogic.com/help for a replacement.
Meantime you can make your own with any other memory stick that you have. Using
Kaffelogic Studio you can put all of the core profiles onto the memory stick and away you go.
Re: new kaffelogic
Posted: Sat 22 Apr, 2023 7:51 am
by Raglan
I have put all the memory profiles onto my memory stick, I pushed "profiles". It went "K-logic classic" Then I pressed Profiles again, it went )-1200m Rest. Then it goes K-logic classic again ???
How do I go through the list of Profiles ???
Re: new kaffelogic
Posted: Sun 23 Apr, 2023 2:55 pm
by kaffelogic
Raglan wrote: ↑Sat 22 Apr, 2023 7:51 am
How do I go through the list of Profiles ???
You are doing the correct thing on the roaster. The problem will be the memory stick.
- Make sure the memory stick is good by putting it in your laptop and performing a check. Ideally use a freshly formatted memory stick.
- Use Kaffelogic Studio to copy the coffee profiles to the roaster
Re: new kaffelogic
Posted: Sun 23 Apr, 2023 4:48 pm
by Raglan
Ive put all the profiles onto a Stick after formatting it (FAT32). But still no go. I need help. Will you give me detailed description? one or two lines is not enough.
Re: new kaffelogic
Posted: Sun 23 Apr, 2023 9:13 pm
by Geronimo
Raglan wrote: ↑Sun 23 Apr, 2023 4:48 pm
Ive put all the profiles onto a Stick after formatting it (FAT32). But still no go. I need help. Will you give me detailed description? one or two lines is not enough.
Re: new kaffelogic
Posted: Mon 24 Apr, 2023 9:41 am
by Raglan
I spelled this correctly. Thanks.
Re: new kaffelogic
Posted: Thu 27 Apr, 2023 12:13 pm
by kaffelogic
- Download, install, and open Kaffelogic Studio. Download here.
- Select Tools> View memory stick > Core profiles > Copy/replace all core profiles
- Also recommended, reset your roaster: hold down the ▸ button while you switch on the power to the roaster.
Re: new kaffelogic
Posted: Fri 28 Apr, 2023 9:01 am
by Raglan
Thanks,
I've sorted all my Roaster Problems. Phew . . . it was a mission, but thanks to Steve, I have profiles to experiment with.
Rags.
Re: new kaffelogic
Posted: Fri 28 Apr, 2023 8:56 pm
by Geronimo
Hi
Steve??? Out of interest which profiles
Cheers
G