Good day ALL
Please find the following Kaffelogic profile attached to be used for tomorrows brew tasting .
3.1 on the recommended Roast end is the recommended Default . If this is not the case , please could you make the adjustment on the Kaffelogic before roasting .
The objective of this profile is ultimately to roast and then directly from roaster , grind and taste ...
I am Looking forward to tasting and comparing notes .
Please if you can , taste the coffee 1 day later and a further 2 days later and ultimately 3 days later .
This might mean , you might have to roast 2 to 3 batches right after each other .
The goal here is to asses the decrease OR increase in taste profile of the coffee over this period - I hope there is a downward trend and taste by day 3 .
We will have a quick discussion around this on Monday 18 May . This will be DAY 3
Have a great Session and see you all tomorrow
Brewing Session - 15 May 2020
Brewing Session - 15 May 2020
- Attachments
-
Altitude 1500-2000 USE DIRECT AFTER ROAST.kpro- (2 KiB) Downloaded 800 times
Re: Brewing Session - 15 May 2020
Hello Dane
No stress . Give it a go . The goal of the Profile is to Roast and then directly after , Use .
We are looking for the flavour generated in the coffee to come through and then hopefully die down over the next few days . Best to try the coffee directly after and then try a day later and a second day after .
Good luck and Have fun
No stress . Give it a go . The goal of the Profile is to Roast and then directly after , Use .
We are looking for the flavour generated in the coffee to come through and then hopefully die down over the next few days . Best to try the coffee directly after and then try a day later and a second day after .
Good luck and Have fun
Re: Brewing Session - 15 May 2020
Hi Wayne,
I did roast a few bags of decaf and Colombian for this, but everything went wrong.
It was suddenly a set of panic roasts as I was roasting for 6 not 1 as I planned, and I didn't cope well. I pressed stop instead of marking first crack. I got distracted so didn't hear the next first crack. I used Mexican instead of columbian........ I was travelling to Wellington at the time of the cupping session. I didn't try any of the coffees for at least 2 days, so they were tasteless and didn't stand up to milk.
Now I have plenty of coffee beans to pass through the grinder after it's been cleaned to clear the cleaning agent!!!!!
I did roast a few bags of decaf and Colombian for this, but everything went wrong.
It was suddenly a set of panic roasts as I was roasting for 6 not 1 as I planned, and I didn't cope well. I pressed stop instead of marking first crack. I got distracted so didn't hear the next first crack. I used Mexican instead of columbian........ I was travelling to Wellington at the time of the cupping session. I didn't try any of the coffees for at least 2 days, so they were tasteless and didn't stand up to milk.
Now I have plenty of coffee beans to pass through the grinder after it's been cleaned to clear the cleaning agent!!!!!